S355NH Normalized Hollow Section: Impact Test Requirements

Keywords: S355NH Hollow Section, S355NH Normalized, EN 10210 S355NH, Hot-finished welded hollow sections
When sourcing structural hollow sections for low-temperature environments or critical engineering projects, S355NH is one of the most sought-after steel grades in Europe. A common and highly specific question from engineers and procurement managers is: What are the exact impact test requirements for S355NH normalized hollow sections at -20°C?

This article provides the definitive answer based on the EN 10210 standard and explains how to ensure your supplied pipes meet these rigorous requirements.


S355NH High-Strength Structural Square and Rectangular Tubing


What is S355NH Steel?


S355NH is a high-strength structural steel grade defined in EN 10210 (Hot-finished structural hollow sections of non-alloy and fine grain steels).

● S355: Indicates a minimum yield strength of 355 MPa.
● N: Indicates that the steel is Normalized (or normalized rolled), a heat treatment process that refines the grain structure.
● H: Indicates it is a Hollow Section.

Because of the normalizing process, S355NH offers superior toughness, making it ideal for structures subjected to dynamic loads or extreme cold, such as offshore platforms, bridges, and Arctic infrastructure.


Available Sections for S355NH
While S355NH is available in all shapes (CHS, SHS, RHS), Square Hollow Sections (SHS) and Rectangular Hollow Sections (RHS) are the most widely used in load-bearing engineering due to their excellent torsional rigidity and connection efficiency. Circular Hollow Sections (CHS) are also manufactured for specialized applications like offshore structures and piling.



S355NH Impact Test Requirements 


According to the EN 10210-1 standard, S355NH hollow sections must undergo a Charpy V-notch impact test to guarantee their low-temperature toughness. The specific requirements for testing at -20°C are as follows:

Parameter Requirement (EN 10210-1)
Test Temperature -20°C
Minimum Impact Energy (KV) 40 Joules (J) (for longitudinal specimens)
Test Standard EN ISO 148-1
Specimen Direction Longitudinal (standard)
Wall Thickness Note Impact values vary subject to section thickness, always confirm with the standard table and material test report.



S355NH vs. S355J2H: What is the Difference?


If you have been sourcing steel pipes, you may have seen S355J2H. How does it compare to S355NH?

● S355J2H: Tests at -20°C with a minimum impact energy of 27J, supplied to EN 10219 cold formed specification, delivered in an "as-rolled" or thermomechanical state. For detailed information regarding dimensions and specifications, please refer to our [S355J2H Hollow Section Specifications].

● S355NH: Tests at -20°C with a minimum impact energy of 40J, produced to EN10210 hot-finished standard and normalized. The normalizing process creates a finer, more uniform grain structure, making S355NH more reliable and consistent in extreme low temperatures, particularly for thicker wall sections.



How Do Steel Manufacturers Control These Requirements?


Achieving a guaranteed 40 J impact energy at -20°C is not just about the raw material; it requires strict production control:

● Chemical Composition: Lower carbon and sulfur content, along with controlled carbon equivalent (CEV) and micro-alloying elements (like Niobium and Vanadium), are essential to avoid brittle fracture.
● Normalizing Process: Heating the steel to a specific austenitizing temperature and cooling it in air refines the grain size, which significantly improves impact toughness.
● Weld Seam Quality: The high-frequency welding (HFW) or submerged arc welding (SAW) process must be strictly controlled. Internal weld flash must be removed, and the heat-affected zone (HAZ) must be examined to ensure it is free of embrittlement.



Exporting S355NH to Europe


If your S355NH hollow sections are destined for the European Economic Area, simply meeting the EN 10210 technical requirements is not enough. The products must also undergo the [EN 10210 CE Certification] process and carry the CE Marking.



Conclusion & Contact Us


Meeting the -20°C impact test requirements for S355NH requires a manufacturer with advanced processing technology and strict quality control. As a leading supplier of EN 10210 structural hollow sections, we guarantee our pipes meet the strictest European standards.

👉 Need S355NH pipes for your next project?
[Contact our technical team today] for material certificates (EN 10204 3.1) and detailed test reports: info@hu-steel.com.



Read more:

● EN 10219 S460MH Piling Pipe: Selection & Application

● Grade Comparison: S355JRH vs S355J2H vs S355J0H vs S355K2H

● EN 10210 Hot-Formed Hollow Sections
● Square & Rectangular Tubes Thickness Selection

Recruiting Agents - Check Policies Here

Copyright @2017 Hunan Standard Steel Co.,Ltd and Husteel Industry Group All Rights Reserved

linkin  youtube

We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.

Accept
Decline