EN 10210 S355NH Structural Hollow Section: SHS & RHS Specifications

Keywords: EN 10210 S355NH Structural Hollow Section, S355NH Structural Tube Specs, S355NH Tube Sizes
When standard cold-formed steel tubes are pushed to their limits by extreme cold or heavy structural loads, EN 10210 S355NH square and rectangular hollow sections (SHS/RHS) become the ultimate solution.

Unlike cold-formed grades, S355NH is a hot finished product delivered in a Normalized (or normalized rolled) condition. This page provides a focused overview of its specifications, advantages over standard grades, and common applications in critical engineering projects.


EN 10210 S355NH Structural Hollow Section


EN 10219 S355NH Specification


Item Specification
Standard BS EN 10210 (Hot Finished Structural Hollow Sections)
Grade S355NH (Normalized)
Section Types Square Hollow Sections (SHS), Rectangular Hollow Sections (RHS)
Size Range

Common Size Range: SHS: 20×20mm – 500×500mm; RHS: 40×20mm – 400×200mm

Standard Size Range: SHS up to 800×800 mm; RHS up to750×500 mm (Per EN 10210-2)

Wall Thickness Up to 120 mm (standard); common supply 3.0–16 mm
Length 6000 – 14000 mm
Delivery Condition Normalized (+N)


▶ Looking for detailed dimensions and unit weights? Since EN 10210 sets a universal dimensional standard, please refer to our comprehensive charts:

👉 [Square Tube Sizes & Dimensions Chart (SHS)]
👉 [Rectangular Tube Sizes & Dimensions Chart (RHS)]


(Note: For S355NH, sizes with wall thickness ≥ 4.0 mm are the most common in production. Hot finished sections typically offer tighter corner radii (2T max) compared to cold-formed alternatives.)



Chemical Composition S355NH Steel


The normalizing process refines the grain structure, but it also requires strict control of the chemical composition, particularly Carbon and Carbon Equivalent (CEV), to ensure optimal toughness.

Grade Element C Mn Si S P CEV
S355NH Max. % 0.20 1.65 0.50 0.030 0.035 0.43


Mechanical Properties of S355NH Steel

Steel Grade Property Value
S355NH Yield Strength ≥ 355 MPa (Thk ≤16mm); ≥345 MPa (Thk >16mm)
Tensile Strength 470–630 MPa
Elongation ≥ 22 %
Impact Energy (KV) ≥ 40 J at -20°C


Why Choose S355NH over Standard S355J2H?


Many buyers ask about the difference between EN 10210 S355NH and the commonly used EN 10219 S355J2H for square and rectangular hollow sections. While both offer 355 MPa yield strength, they differ significantly in their production process and performance limits:


a. Finer Grain Structure & Higher Toughness: The normalizing process in S355NH creates a much finer, more uniform microstructure. More importantly, it guarantees an impact energy of ≥ 40 J at -20°C (compared to just 27 J for S355J2H), providing a much larger safety margin against brittle fracture.
b. Superior Thick-Wall Toughness: For heavy-wall sections (> 16mm), S355J2H (as-rolled) can sometimes struggle to maintain consistent toughness throughout the thickness. S355NH guarantees that the core of the steel remains ductile, uniform, and resistant to brittle fracture under extreme cold.
c. Lower Residual Stress & Critical Safety: Because it is hot-finished and normalized, S355NH has lower internal residual stress, making it more dimensionally stable during welding. It is the preferred choice when structural failure carries catastrophic consequences.



Typical Applications for S355NH SHS & RHS


Because of its high strength, guaranteed 40J low-temperature toughness, and normalized microstructure, S355NH is specified for:

1. Offshore & Marine Engineering: Oil rig platforms, heavy-duty dock supports, ship hull structures, and subsea frameworks.
2. Heavy Infrastructure: Large-span bridge trusses, high-rise building columns, and extreme cold-region construction (Arctic/Antarctic projects).
3. Heavy Machinery: Crane booms, mining equipment frames, and critical load-bearing components where failure is not an option.



Compliance and Procurement Tips


To export S355NH structural hollow sections to the European market, compliance is mandatory:

● CE Marking: The product must undergo the [EN 10210 CE Certification] process under the EN 1090 system.
● Material Certification: Always request an EN 10204 3.1 Mill Test Certificate to verify the actual chemical and mechanical test results for the specific heat number. The certificate should explicitly state the 40J @ -20°C impact energy result.



Get a Quote for S355NH SHS & RHS


To purchase EN 10219 S355NH normalized hollow sections, please provide:

● Specifications (e.g., 200×200×10 mm)
● Length requirement & Quantity
● Delivery location


👉 [Contact our technical team today]: sales@hu-steel.com



Related Resources
● S355NH Impact Test Requirements
● EN 10219 S460MH Piling Pipe: Selection & Application
● EN 10219 S355JRH Structural Pipe Grade Selection

Recruiting Agents - Check Policies Here

Copyright @2017 Hunan Standard Steel Co.,Ltd and Husteel Industry Group All Rights Reserved

linkin  youtube

We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.

Accept
Decline