News

EN 10219 S235JRH Square Hollow Section: Sizes & Weight Chart

Keywords: EN 10219 S235JRH square tube sizes, S235 square hollow section, S235 square tube weight

EN 10219 S235JRH Square Hollow Section refer to cold-formed welded square hollow profiles (SHS) manufactured according to the European standard EN 10219, with the material grade S235JRH. This product is the most basic and common structural steel pipe grade under the EN 10219 standard, suitable for conventional engineering applications with low load-bearing requirements.

This page provides specifications, weight tables, chemical composition, mechanical properties, tolerances, and surface protection information for S235JRH square hollow sections. ▶ For a comprehensive overview of the material and its applications, see our [EN 10219 S235JRH Steel Pipe].

EN 10219 S235JRH Square Cold Formed Hollow Section Specification

EN 10219 S235JRH Square Tubes: Sizes & Weight Chart Standard: BS EN 10219 - Cold Formed Welded Structural Hollow Sections of Non-alloy and Fine Grain Steels

Grade: S235JRH
Square Hollow Section (SHS Tube) Sizes: 20*20mm-400*400mm
Wall Thickness: 0.5mm - 25mm
Length: 6000-14000 mm
Type: Welded / ERW
Dimensional Tolerances: Thickness : (All sizes +/- 10%)

Packing: In bundles, Anticorrosion heat preservation, Varnish coating, Ends can be bevelled or square cut, End Capped Certification & supplementary test, Finishing & Identity Mark.
Surface Protection: Black Square Tube (Self Coloured uncoated), Varnish/Oil Coating, Pre-Galvanized, Hot Dip Galvanized.

EN 10219 Standard Definition

The EN 10219 standard specifically addresses cold-formed welded hollow profiles. All square, rectangular, and round hollow profiles manufactured according to EN 10219 are welded pipes (welding processes include HFI/ERW, SAW, etc.). This standard strictly specifies: manufacturing process (cold forming + welding), dimensional tolerances (EN 10219-2), mechanical properties, chemical composition, and surface quality.

If your project requires the use of seamless tubing or hot-rolled hollow profiles, refer to EN 10210 (Hot-rolled Hollow Profiles).

S235JRH Meaning

S: Structural Steel
235: Minimum yield strength of 235 MPa (applicable to wall thickness ≤ 16 mm)
JR: Impact energy at +20°C ≥ 27 J

H: Hollow Section

△S235JRH vs S235J2H: S235JRH only guarantees room temperature (+20°C) impact toughness (≥27 J), suitable for normal temperature environments and indoor structures; while S235J2H guarantees -20°C impact toughness, suitable for cold regions or winter construction environments.

S235 Material Code Quick Reference Table

Suffix	Impact Test Temperature	Minimum Impact Energy	Application
S235JR	+20°C (Room Temperature)	27 J	Normal Temperature Environment, Indoor Structure
S235J0	0°C	27 J	Temperate Regions, General Outdoor Applications
J2	-20°C	27 J	Cold Regions, Winter Construction, Nordic Exports
K2	—	—	Not specified in EN 10219 for S235. K2 grade is only available for S355 under this standard.

Chemical Composition of S235JRH Square Hollow Section (max, %)

Steel Grade	Thickness (mm)	C (max, %)	Si (max, %)	Mn (max, %)	P (max, %)	S (max, %)	N (max, %)	CEV (max, %)
S235JRH	t ≤ 16	0.17	–	1.40	0.040	0.040	0.009	0.37
S235JRH	16 < t ≤ 40	0.17	–	1.40	0.040	0.040	0.009	0.39
S235JRH	40 < t ≤ 65	0.20	–	1.40	0.040	0.040	0.009	0.41
S235JRH	65 < t ≤ 70	0.20	–	1.40	0.040	0.040	0.009	0.44

Mechanical Properties of S235JRH Square Hollow Section

Steel Grade	Thickness (mm)	Yield Strength (N/mm²)	Tensile Strength (N/mm²)	Elongation (%)	Test Temperature (°C)	Impact Value (J)
S235JRH	t ≤ 16	≥ 235	360–510	≥ 26	20	≥ 27
S235JRH	16 < t ≤ 40	≥ 225	360–510	≥ 26	20	≥ 27
S235JRH	40 < t ≤ 63	≥ 215	360–510	≥ 25	20	≥ 27
S235JRH	63 < t ≤ 70	≥ 215	360–510	≥ 24	20	≥ 27

EN 10219 S235JRH - Cold Formed Square Hollow Section Sizes

Size (mm)	kg/m	Size (mm)	kg/m
20×20×2.0	1.12	20×20×2.5	1.35
25×25×1.5	1.06	25×25×2.0	1.43
25×25×2.5	1.74	25×25×3.0	2.04
30×30×2.0	1.68	30×30×2.5	2.14
30×30×3.0	2.51	40×40×1.5	1.81
40×40×2.0	2.31	40×40×2.5	2.92
40×40×3.0	3.45	40×40×4.0	4.46
40×40×5.0	5.40	50×50×1.5	2.28
50×50×2.0	2.93	50×50×2.5	3.71
50×50×3.0	4.39	50×50×4.0	5.72
50×50×5.0	6.97	60×60×3.0	5.34
60×60×4.0	6.97	60×60×5.0	8.54
60×60×6.0	9.45	70×70×3.0	6.28
70×70×3.6	7.46	70×70×5.0	10.11
70×70×6.3	12.50	70×70×8	15.30
75×75×3.0	7.07	80×80×3.0	7.22
80×80×3.6	8.59	80×80×5.0	11.70
80×80×6.0	13.90	90×90×3.0	8.01
90×90×3.6	9.72	90×90×5.0	13.30
90×90×6.0	15.76	90×90×8.0	20.40
100×100×3.0	8.96	100×100×4.0	12.00
100×100×5.0	14.80	100×100×6.0	17.71
100×100×8.0	22.90	100×100×10	27.90
120×120×5	18.00	120×120×6.0	21.30
120×120×6.3	22.30	120×120×8.0	27.90
120×120×10	34.20	120×120×12	35.80
120×120×12.5	41.60	140×140×5.0	21.10
140×140×6.3	26.30	140×140×8	32.90
140×140×10	40.40	140×140×12.5	49.50
150×150×5.0	22.70	150×150×6.3	28.30
150×150×8.0	35.40	150×150×10	43.60
150×150×12.5	53.40	150×150×16	66.40
180×180×5	27.40	180×180×6.3	34.20
180×180×8	43.00	180×180×10	53.00
180×180×12.5	65.20	180×180×16	81.40
200×200×5	30.50	200×200×6	35.80
200×200×6.3	38.20	200×200×8	48.00
200×200×10	59.30	200×200×12.5	73.00
200×200×16	91.50	250×250×6.3	48.10
250×250×8	60.50	250×250×10	75.00
250×250×12.5	92.60	250×250×16	117.00
300×300×6.3	57.90	300×300×8	71.60
300×300×10	88.40	300×300×12.5	112.84
350×350×8	85.70	350×350×10	106.00
350×350×12.5	132.00	350×350×16	167.00
400×400×8.0	97.90	400×400×10	122.00
400×400×12	141.00	400×400×12.5	151.00
400×400×16	192.00

S235JRH vs S355JRH Square Tube

Comparison Items	S235JRH	S355JRH
Minimum Yield Strength (≤16mm)	235 MPa	355 MPa
Tensile Strength Range	360–510 MPa	490–630 MPa
Elongation	24%	20%
Impact Test Temperature	+20°C	+20°C
Carbon Equivalent (CEV)	0.35%	0.45%
Weldability	Excellent	Good
Application	General load-bearing, non-critical structures	High load-bearing requirements
Price	Lower	Higher (+15–20%)

Core Advantages of S235JRH Square Tubes

1. Optimal Economic Efficiency
S235JRH is the lowest strength grade of structural steel under the EN 10219 standard, offering the most competitive price. For non-critical load-bearing structures or projects with low strength requirements, S235JRH is the most cost-effective choice.

2. Excellent Weldability
Carbon content ≤ 0.17%, carbon equivalent ≤ 0.35%, far lower than S355 grade steel:

Suitable for all conventional welding processes
Thin-walled specifications require no preheating
Extremely low risk of heat-affected zone cracking
High on-site construction efficiency

3. Good Formability
As a cold-forming product, S235JRH maintains good plasticity and is easy to perform:

Cutting, drilling, stamping
Cold bending, flattening
Flanging, necking

4. CE Certification and Compliance
S235JRH square hollow profiles are available with the following certifications:

●EN 10204 Type 2.2 test report (standard supply)
●EN 10204 Type 3.1 certificate (on demand)
●CE marking (compliant with CPR regulations)

●UKCA marking (UK market)

Applications

S235JRH Square hollow profiles are suitable for engineering scenarios with medium strength requirements and a focus on economy:

1. Construction Industry: Industrial plant support, warehouse frames, scaffolding, formwork support
2. Mechanical Engineering: Agricultural machinery, truck and trailer manufacturing, cranes, construction machinery
3. Vehicle Manufacturing: Truck body frames, trailer structures, bus manufacturing
4. Renewable Energy: Solar parking sheds, photovoltaic tracking brackets

5. General Steel Structures: Stairs, railings, platform walkways, fences, billboards

Procurement and Application Recommendations

① Confirm Impact Toughness Requirements
If the project is located in a cold region or involves winter construction, the room temperature impact resistance of S235JRH may be insufficient; S235J2H (-20°C impact guarantee) should be selected.

② Verify Material Certificates
Require suppliers to provide EN 10204 certificates during procurement to verify chemical composition and mechanical property data.

③ Key Points for On-site Inspection: Upon arrival, randomly sample and inspect the side length and wall thickness according to EN 10219-2 tolerance standards:
Side length deviation: ±1% (minimum ±0.5mm)
Wall thickness deviation: ±10% when t≤5mm, ±0.5mm when t>5mm

④ Corrosion Protection Treatment

S235JRH is carbon steel and is not inherently corrosion-resistant. S235JRH is suitable for hot-dip galvanizing (galvanizing category A). When used outdoors or in humid environments, hot-dip galvanizing or coating protection is required.

Get A Quote for S235JRH Square Hollow Section

To purchase EN 10219 S235JRH square hollow profiles, please provide the following information for a quick quote:

● Specifications (side length × wall thickness)
● Length requirement
● Quantity
● Delivery location
● EN 10204 Type 3.1 certificate required?
● CE marking required?

For a quote on S235JRH square hollow profiles, please contact: sales@hu-steel.com

● Square Tube vs. Rectangular Tube Load-bearing Capacity

● Square Tube Weight Calculation Formula

● EN 10219 S235JRH Steel Pipe: Properties, Composition & Applications

● EN 10219 S355J2H Square & Rectangular Tube Sizes
● EN 10219 S460MH Piling Pipe: Selection & Application

[Back]

Related information