Inspection methods of galvanized square and rectangular tubes

The inspection methods of galvanized square tubes and rectangular tubes mainly include the following five aspects:

1. Appearance inspection
During the appearance inspection, the surface of the square rectangular pipe needs to be carefully observed to check whether there are obvious depressions, bulges, wrinkles, wear or cracks, etc., to ensure that the surface of the pipe body is smooth and does not affect its use.

2. Dimensional inspection

When performing dimensional inspection, you need to use measuring tools such as rulers and calipers to measure the length, width, height and wall thickness of the square tube to check whether it meets the specified standards and ensure that it is not restricted by size when used.

3. Incision inspection
For the incisions of galvanized square and rectangular tubes, it is necessary to check whether they are flat and smooth, and there must be no burrs, cracks or peeling, etc. to ensure that the quality of the incisions can affect the service life of the square and rectangular pipes.

4. Weld inspection
When inspecting the welding process, it is necessary to observe whether the welds at the welding position are uniform and firm, as well as whether there are any bad marks, etc. to ensure that the welding quality meets the standard requirements and does not affect the use of square and rectangular pipes.

5. Zinc layer inspection
The outside of galvanized square and rectangular tubes is coated with a zinc layer, which needs to be inspected to determine the uniformity of the distribution of the zinc layer and whether the thickness of the zinc layer meets national standards to ensure the rust-proof and anti-corrosion properties of galvanized square and rectangular tubes.

To sum up, the inspection of galvanized square and rectangular tubes mainly includes appearance, size, incision, weld and zinc layer. Through inspection, the quality of galvanized square and rectangular tubes can be ensured and the safety of use can be ensured. At the same time, it is also recommended that users choose qualified manufacturers when purchasing square and rectangular tubes and request quality guarantee certificates to ensure that they purchase square and rectangular pipe products that meet the standards.

Tips: ASTM A500 Steel Tube possesses excellent strength and mechanical properties. These tubes have a minimum tensile strength of 400Mpa and a minimum yield strength of 250Mpa. The ASTM A500 Tube can be readily machined and elongated by 25%. These tubes also, known as carbon steel tubes which are highly reliable and precise.

Go here to learn more about "square tube sizes"