What to do if the drill pipe of a directional drilling rig is broken?

Reasons and countermeasures for drill pipe breakage in directional drilling rigs:

During the drilling process of directional drilling rigs, drill pipe fracture is a common problem due to the complexity of the geological environment and other reasons. There are many reasons for drill pipe breakage, including poor drill pipe quality, old drill pipe, improper drill pipe maintenance, etc. Regardless of the cause of the drill pipe breakage, timely and effective response measures must be taken after the drill pipe breaks to ensure the normal progress of the work and the safety of the workers.

First of all, when the drill pipe breaks, the drilling work should be stopped immediately and the following measures should be taken:

1. On-site treatment

If the drill pipe fracture is relatively simple, on-site treatment can be adopted. For example, a steel pipe joint can be welded at the break, or a drill pipe can be drilled and chips added to reinforce the break. Although this method is relatively simple, it also requires a certain technical level. Special attention should be paid to safety when operating on site to avoid further accidents.

2. Replace the drill pipe

 If the drill pipe breaks seriously or breaks multiple times, it is recommended to replace the drill pipe. When replacing drill pipes, you need to choose drill pipes of good quality and appropriate length, and safety must be ensured during installation. The cost of replacing drill pipe is relatively high, but it can improve drilling efficiency and ensure safety.

3. Strengthen safety measures

In order to prevent the drill pipe from breaking, effective safety measures should be taken. For example, you can use high-quality, specially treated drill pipes, and determine the downforce and rotation speed of the drill pipes based on geological conditions, usage conditions of the drill pipes and other factors during work to avoid excessive wear and breakage. At the same time, regular inspection and maintenance of drill pipes are required during the work process, including cleaning, lubrication, and trimming operations.

Summarize:

As can be seen from the above introduction, drill pipe breakage on directional drilling rigs is a common problem that needs to be dealt with in a timely manner to ensure the normal progress of work and the safety of workers. There are many reasons for drill pipe breakage, and appropriate countermeasures should be taken, including on-site treatment, replacement of drill pipe, and enhanced safety measures. This can improve work efficiency, reduce the incidence of safety accidents, and ensure the normal progress of work and the safety of personnel.

Go here to learn more: What is oil drill pipe? What types of oil drill pipes are there?