Manufacturing Method of Carbon Seamless Seel Pipe

Carbon seamless steel pipe is generally in the automatic production of rolling pipe unit. The solid blank is inspected and removed from the surface defects, cut into the required length, in the tube end of the perforation end of the centering, and then sent to the heating in furnace, perforation in the punch.continue to rotate and move when perforation, in the role of the roll and the head, the tube gradually formed within the cavity, called the capillary. And then sent to the automatic rolling machine to continue rolling. And finally by the whole machine are the whole wall thickness, by sizing machine diameter, to specifications. The use of continuous rolling mill production of hot-rolled seamless steel pipe is a more advanced method.

If you want to get smaller and better quality of seamless tubes, it must be cold-rolled, cold drawn or a combination of the two methods. Cold rolling is usually carried out on a two-roll mill, in which the steel pipe is rolled in an annular orifice formed by a tapered hole and a non-moving tapered head. Cold drawing is usually carried out on single-chain or double-chain cold drawing machines of 0.5 to 100T.

The extruding method is to place the heated tube in a closed extruding cylinder which is moved with the extruding rod to squeeze the extrudate from the smaller die hole. This method can produce smaller diameter steel pipe.