How to remove rust from welded steel pipes?

How to remove rust from welded steel pipes?

1. Mechanical grinding method
Mechanical grinding is one of the more common rust removal methods for welded steel pipes and is suitable for large-area rust removal. The specific operation steps are to first use a copper wire brush to remove the surface rust, and then use mechanical equipment such as an electric polisher to polish the steel pipe. What needs to be noted is that the grinding must be even and detailed, especially the joints, to achieve the rust removal effect while ensuring the surface quality.

2. Chemical rust removal method

Chemical rust removal method refers to the use of chemicals to reduce iron oxide into easily soluble amorphous matter to achieve the purpose of rust removal. This method is a comprehensive and thorough rust removal method. It is suitable for local rust spots on the pipe wall and a small amount of rust spots on the surface. However, the selection of chemical agents and soaking time need to be strictly controlled. Common rust removal agents include acids, alkalis, chelating agents, etc., which need to be selected according to actual conditions.

3. Electrochemical rust removal method
The electrochemical rust removal method uses electrochemical reactions to react surface oxides with positively charged electrodes to achieve the purpose of rust removal. This method is simple to operate, has good rust removal effect, and does not damage the metal matrix of the steel pipe, but it requires special equipment and power supply. In addition, this method needs to control the current density and time to ensure the rust removal effect.

The above three methods all have their own advantages, disadvantages and scope of application, and the specific use should be selected according to the actual situation. In addition, you should also pay attention to the following points:

1. When using the mechanical grinding method, be sure to ensure that tools such as steel pipe copper wire brushes and polishers are clean to prevent secondary pollution caused by contact with rust.
2. When using chemical rust removal and electrochemical rust removal, you must master the relationship between the agent and the current time, and strictly abide by the process requirements to avoid accidents.
3. For steel pipes with deep rust spots on the surface, they need to be pre-treated by sandblasting, water cutting, etc., and then choose an appropriate rust removal method.
4. After rust removal, the steel pipe needs to be cleaned promptly and thoroughly to ensure that the inner surface of the pipe is uniform, smooth, clean and pollution-free.

In short, the choice of steel pipe rust removal method should be selected according to the specific environment and usage requirements. At the same time, we must also pay attention to personal safety and environmental protection, and contribute to ensuring our own health and the sustainability of the ecological environment.

Go here to learn more about " Matters needing attention when purchasing welded steel pipes"