Precautions for Installation of Carbon Seamless Steel Pipe

Keywords:Precautions for Installation of Carbon Seamless Steel Pipe
(1) Carbon seamless steel pipe should be carefully installed before the following carefully checked to ensure the quality of pipe and pipe.

A. Check the factory and pipe fittings factory certificate, quality certificate or test records, test records and other technical information, and should comply with existing national standards.
B. Check the quality marks of the pipe and fittings, expansion joint to meet the technical document and the current national standard. If there is any problem, replace or take the measures.
C. Check the quality of the outer surface of the pipe and pipe fittings, wall thickness should be consistent with national standards. The ellipticity is not allowed to exceed the specified range. No cracks, no shrinkage, no slag, no folding, no heavy skin, no trachoma, no pinhole, no more than the thickness of the local pit tolerance, no bumps and other quality problems, and the tube Internal and external surface without serious corrosion when the pipe and pipe fittings qualified.

(2) When the pipe surface rust less number of pipes can not be used when the number of hand-rust, the general hand-rust is a wire brush, wire cloth, emery cloth and other friction, remove the rust on the pipe surface, and then dry cotton yarn Wipe or clean, so that the pipe surface exposed metallic luster.

(3) When the pipe surface rust more, and the larger number of pipes and generally use mechanical rust or sand blasting rust or pickling rust. Pickling rust rust when the general use of sulfuric acid or hydrochloric acid.

(4) Brush the surface of the pipe type of anti-rust paint should be selected according to design requirements, commonly used red lead rust paint, epoxy paint, etc., the surface finish is generally blending paint.

Before painting, clean the surface of the pipe clean dust, dirt, burr, oil and water. Brush should be uniform coating, do not leak coating, brush the paint after the eligibility criteria for attachment firmly, no flaking, no wrinkles, no bubbles, no leakage coating, no damage and other defects.
Copyright @2017 Hunan Standard Steel Co.,Ltd and Husteel Industry Group All Rights Reserved
  

We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.

Accept
Decline